background image

15

be connected directly to copper piping. From here the barbecue 
cannot be moved. 

•  The copper piping can terminate in a “bayonet point” on a wall 

or other structure. A special hose and terminator allows the 
barbecue to be connected and disconnected from the bayonet 
point safely and conveniently. This allows the barbecue to be 
moved if necessary.

PORTABLE ULPG CYLINDER

The most flexible arrangement is a portable ULPG gas cylinder 
attached by a special hose and regulator to your barbecue. 
Although the cylinder needs to be refilled or exchanged when 
empty, this installation has the advantage of being more mobile, and 
not requiring the services of a licensed gas fitter.

BUILT IN

Whatever gas option you choose, your barbecue can be 
permanently built-in. 

GENERAL REQUIREMENTS

We recommend that this installation be done in a masonry 
structure and carried out by a professional tradesperson. Other 
non-combustible material such as Hardiplank, Villaboard with 
metal studs may also be used. 

The installer must test the 

appliance and instruct the user regarding the operation of 
the appliance.

This appliance must not be installed under or on any combustible 
material. Minimum clearance from combustible construction 
materials to all sides of the appliance is 450mm (18”).
Warning: Contact your local municipality for any building codes 
regulating the installation of outdoor barbecue appliances. Outdoor 
installations must conform to local codes or, in the absence of local 
codes, with:
• AUST: Australian Standards Code AS/NZS 5601 
as well as the requirements of any local council, gas, electricity 
authority or other statutory regulation.

THE BARBECUE CAVITY

Your barbecue has been designed to sit into a cavity or cutout 
rather than be placed directly onto a flat surface. It is important that 
the dimensions of the cavity conform exactly to those shown (pg 
16-18). This will ensure the barbecue sits correctly in the cavity, and 
that the barbecue has sufficient ventilation to operate efficiently and 
safely. It also allows room for any roasting hood to open freely,
In creating the cavity, you should ensure that you have convenient 
access to the gas connection point and associated hardware:
•  If the gas for your barbecue is supplied by a portable gas bottle, 

you will need access to the gas connection point, the gas hose 
and the gas cylinder at all times.

•  If the gas for your barbecue is supplied by a fixed piped gas 

supply (either natural gas or 45kg LPG cylinders), you will need 
access to the gas connection point, the piping and the shutoff 
valve.

OTHER PRECAUTIONS

Do not obstruct any of the ventilation openings in the barbecue 
body. Should you need to change the gas cylinder, confirm that the 
cylinder is off, and that there are no sources of ignition (cigarettes, 
open flame, sparks, etc.) near before proceeding. Be sure to 
inspect the gas hose and ensure it is free of any twisting or tension. 
The hose should hang freely with no bends, folds, or kinks, which 
could obstruct free flow of gas. Apart from the connection point, 
no part of the hose should touch any hot barbecue parts. Inspect 
the hose before use. If the hose is damaged, it must be replaced 
with a hose suitable for use with ULPG and meet the national 
standards for the country of use. The length shall not exceed 1.5m. 
Should minimum clearances not be adhered to severe flare up may 
be experienced due to lack of airflow around the barbecue, thus 
voiding manufacturer’s warranty.

Содержание AMBASSADOR DELUXE IB 611UB-W

































Отзывы: