Masport AMBASSADOR 80.40RBW 210 Скачать руководство пользователя

Страница: 6 / 32

559802 - Masport 4/6 Burner 210 Series - May 2015

3. Assemble 1pc Left skirt (item 3) to the Base tray using 3pcs Screw M6×12 (item a) and 1pc Screw M5*10 (item d) from the fastener kit.

Screw M6*12

Screw M5*10

4. Assemble 1pc Right skirt (item 4) to the Base tray using 3pcs Screw M6×12 (item a) and 1pc Screw M5*10 (item d) from the

fastener kit.

Screw M5*10

Screw M6*12

Rear of the
barbecue

5. Assemble 4pcs Castors (item 5) to the Base tray using 16pcs Screw M6×12 (item a) from the fastener kit.

Assemble the casters and lock the rear castors before assembling the cabinet

Screw M6*12

Lock this castor

Locking the rear castors will steady the base.
Position the base with the locks facing outwards.

Lock this

castor

Front of the
barbecue

Here on going forward keep the screws loose until the cabinet structure is complete. This will greatly assist with positioning the

panels. Tighten all screws when cabinet is assembled.

6. Assemble the Left panel (item 6) and Right panel (item 7) to the Base tray using 4pcs Screw M6×12 (item a) from the fastener kit.

M6*12

Screw M6*12

Содержание AMBASSADOR 80.40RBW 210

































Результаты поиска

Содержание AMBASSADOR 80.40RBW 210

Отзывы:

Похожие инструкции для AMBASSADOR 80.40RBW 210

Бренды по названию

Популярные бренды

Masport AMBASSADOR 80.40RBW 210, Руководство пользователя

Результаты поиска

Содержание AMBASSADOR 80.40RBW 210

Отзывы:

Похожие инструкции для AMBASSADOR 80.40RBW 210

Бренды по названию

Популярные бренды