TB61_1ENG
TB6 User’s manual
8/8
Important safety notes
TB6 is projected and engineered to comply to EU safety and electromagnetlical
compatibiliy CEI EN 60065, EN 55103-1 and EN55103-2. CE mark indicates the
compliance. Furthermore, even if ambient policy of MGD limits at the minimum the use of
potentially polluting components, according to current EU laws customer must waste this
device in special sites.
Nevertheless, in order to avoid shock or hurt risks, you should follow carefully the
indications reported in this manual and in the next list:
•
Never open the case. No serviceable parts inside. For service, refer to MGD or
qualified and skilled personnel.
•
Never remove any screw.
•
Don't espose TB6 to rain, water sparks, excessive humidity, chemical
vapours, heavy dust, heat fonts, strong vibrations.
•
Never introduce in the plugs objects different than corresponding
connectors.
•
Always use CE/FCC-approved and good conditions power supply.
•
Before switch TB6 on, check mains and ouptut voltages value on the power
supply.
Technical specs.
Six loops true bypass system.
Power requirements: 9V AC/DC 500mA
Parasitic capacitance on the signal with loops in bypass: <100pF.
Switching time: < 50ms.
Ambiental conditions: 10-40’C, 30-90% no condensation humidity.
©Masotti Guitar Devices 03-2006– Via C. Battisti 107, 01010 Farnese (VT) Italy.
Tel. +39 0761 458076
URL:
www.masottiamp.it
For info please contact us at e-mail
.
