TB61_1ENG
TB6 User’s manual
4/8
General descripiton.
TBS is a floor looper, completely true bypass, that manages up to six effects both in direct
mode (by corresponding stomps) and via MIDI. Noise switch is absent tanks to our
clickless technology based on a microprocessor that acts on the internal gold plated relais.
Signal passes through them only, no semiconductor is present on the signal path.
By the six stomps, any loop can be included or excluded at any time. Via MIDI, any
combination of the six loops can be recalled by a simple Program change. The
combination can be temporarily modified by the stomps and it can be restored simply
sendind again the same Program Change.
The same combination can be easily stored in different program changes (see next
paragraphs). Mechanical structure of TBS is roust for heavy duty live applications. The
loops status is clearly indicated by six red leds, while a multicolor led indicates the status
of the device (normal or programming mode).
Two or more TB6s can be easily connected in daisy chain.
In the MGD products panorama, PW4 and MIDI STOMP are the ideal complements for
TB6 to have a no-compromise and flexible pedal board.
Commands and connectors.
On the front panel, the six stomps are avalaible for the immediate access to loops. The
corresponding leds indicate the loop status. Graphics allow the signal path visualization.
On the right side we can find input jack, MIDI IN and MIDI THRU plugs.
