TB61_1ENG
TB6 User’s manual
6/8
6) Repeat 4 an 5 steps as necessary.
7) Move the prog switch in low position; status LED becomes green. Now TB6 is in
normal mode and you can start to play and enjoy it!
You can move to normal mode to prog mode and vice-versa in any time simply acting
on the left side switch.
Standard MIDI map.
Factory map has the bypass on patch 0, loops 1 and 4 on patch 1, loops 2 and 5 on patch
3, loops 3 and 6 on patch 4. It is only a test map and you need to set your own map
following the proper procedure as illustrated before.
Connections.
In the following picture you can find the standard connections for TB6.
TYPICAL CONNECTIONS
IN
IN
FX 1
OUT IN
SEND1
RET1
FX 6
OUT IN
RET6
SEND6
..............
OUT
9V -
500mA
PWR
SUPPLY
MIDI IN
MIDI
THRU
Power supply.
TB6 requires a 9V 500mA power supply. A stabilized power supply is preferred in order to
minimize hum and disturbs, even if TB6 accepts also 9V AC power supplies. Polarity is not
important, plug must be a standard 2.1mm internal diameter. IMPORTANT: The power
