masosine MR 160, Руководство пользователя

Страница: 18 / 29

Revision 8.0 / July 2015
18
21.2 Assembly of mechanical seal system
Fit the seal face in the stainless steel static part. Fit the bellow into the stainless steel dynamic part.
Depending on where window should be located
insert the locking pin in the required position
(for window left/right side). Check if all O-
Rings are correctly installed. Pre-align the seal
housing with the pin mark and push the seal
housing to the stop end. Then the pre-assembled
dynamic –unite can be fitted to the shaft.
22 Dismantling of Mechanical Seal System
After opening the front cover and the locking nut as described in the manual, pull the front liner out of the
pump housing, remove the rotor together with the scraper gate and scraper gate guide.
The dynamic unit of the mechanical seal can be removed. Be careful with the faces.