DEFINITION CABLE ROUTING
(A) Choose full or interrupted outer for the front
mech and pick appropriate MultiPort parts. Run the
front-mech outer through the higher MultiPort boss
on the down tube, and the rear-brake through the
lower MultiPort boss.
(B, E) Run full-outer to rear mech and brake. You’ll
have to run the cable & hose through the ThruBB
before fitting the bottom-bracket.
(C) Run the front-mech cable through the 3D BB
cable guide and sleeve with 23mm cable outer.
(D, F, G) If using a Di2 shifting setup, fit the 45
0
Di2
Grommet to the Di2 MultiPort. Run the cable through
the right hand side of the down tube.
05 – ASSEMBLY
A
B
C
D
Содержание Di2
Страница 1: ...SET UP AND CARE GUIDE ...
