Mason Di2, Руководство по установке и эксплуатации

Страница: 8 / 14

FRAME ASSEMBLY GUIDANCE
Fitting headset (A & B) Grease headset cups. Fit crown race and
lower (larger) bearing to fork steerer. Insert fork into head tube and
fit remaining headset parts in order as shown on 04 Resolution/
Definition Frame Contents. Ensure that you fit the thin metal
headset shims to achieve (C) correct gap. The headset top cap
should not contact the head tube.
Fitting steerer expander bung (D) After cutting steerer to desired
length, ensure steerer is clean and free of swarf. Lightly grease the
internal wedge of the expander, and insert into fork steerer. Torque to
no more than 3Nm.
Tighten the top-cap to adjust headset bearing play.
• Grease all MultiPort insert parts and screws before assembly.
Make sure screws are threaded in carefully and not overtightened.
• Grease headset seats and BB threads before assembly.
• Use the supplied M Δ SON structural nylon BB cable stop
when running a mechanical front-mech, remove when using
electronic shifting.
• Use the supplied cable liner to run the front mech cable from
BB cable-stop to mech.
• If you are fitting mudguards, use the M Δ SON 3D printed
brackets. These will be supplied with every frameset and are in
production now. Please contact us and we’ll post a set out.
05 – ASSEMBLY
Correct gap
Shims
Grease
Grease
Grease
A B
C D