Masibus CDU-LCD, Руководство пользователя

Страница: 24 / 32

Model: CDU-LCD
Doc. Ref. no.:- mMP/om/601
Issue no.00.06
User’s Manual Page 24 of 32
40076 Memory
Erase Clear DP & RH + T Log
1: Clear Log
-
40077 Factory
Default Factory reset
1975 : Configuration reset
1976 : Calibration reset -
40078 Software
Version
-
-
40079 Internal
Sensor Available Internal Sensor
0 : NA
1 : DP NA
40080 Remote
Sensor Available Internal Sensor
0 : NA
1 : RH + T NA
40081 Log Mode
Type Log Mode Type
0 : HOLD
1 : OVERLAP
Note:
1. In Hold Type CDU will stop storing data after
maximum limit (4 lakh) of log is reached.
User has to clear data using SCADA or Utility
software
2. In OVERLAP type CDU will reset counter
after maximum limit is reached so old data
will be lost if data is not retrieved.
OVERLAP
40082 Log Alarm Buzzer on memory full(Applicable if Log mode type
is HOLD)
0 : Buzzer OFF
1 : Buzzer ON Buzzer
OFF
40083 AHU AHU Enable or Disable on GUI
0 : Disable
1 : Enable Enable
40084 Digital Input Digital Input Enable or Disable on GUI
0 : Disable
1 : Enable Enable
40085 Periodically
LCD Reset Periodically LCD Reset Enable or Disable
1 : Enable
2 : Disable Enable
40086 Time Time Enable or Disable on GUI
1 : Enable Enable