Masibus 9000C Series, Руководство пользователя

Страница: 3 / 5

Doc.Ref No.:m92E/om/101
Issue No.:09
9000C
Dimensions
9000C STANDARD SOP
9000C STANDARD DOP
9000C SOP/DOP HART PASS
All dimensions are in mm.
S
PECIFICATION
Input
Input Type Voltage/ Current
Input Range
•
‘S’ Model - 4-20mA Standard
•
‘M’ Model – For Voltage: Min: 0 to
±100mV,Max:0 to ±10VDC.
For Current:Min:0 to ±1mA, Max:0 to
±10mA/+20mA
•
‘H’ Model – 4-20mA, HART Pass
Input Impedance
Current I/P ≤ 10 Ω ; Voltage I/P ≥ 1 M Ω
Output
Output Type Voltage/Current
Output Range
•
‘S’ Model - 4-20mA Standard
•
‘M’ Model – For Voltage:Min:0 to
±100mV,Max:0 to ±10VDC
For Current:Min:0 to ±1mA,
Max:0 to ±10mA/+20mA
•
‘H’ Model – 4-20mA HART Pass on OP1,
4-20mA Standard on OP2
Response Time
≤ 50 ms
Accuracy
± 0.1% of FS
Output Load resistance
For 0/4mA to 20mA :
≤
750
Ω
(
≤
600
Ω
for
HART Pass OP1)
For 0/1 to ±5V:
≥ 470 Ω
For 0 to ±10V: ≥ 1 K Ω
TPS Output
Transmitter Power Supply 24VDC
Max current Limit: 26mA Electronic
Power Supply
Power Supply 20 to 265VDC/AC, 45Hz-65Hz
Power Consumption
≤
5VA
CMRR
>100dB
NMRR
>70dB
Isolation
Isolation
Power to Input / Output, Input to Output,
Output to Output– 1.5KV AC for 1 minute
Environmental
Operating temperature 0 to 55ºC
Temp. Co-efficient
≤
100 PPM
Relative humidity 30 to 95% RH (Non-Condensing)
Protection
Conformal Coating on PCB
Physical
Mounting Type DIN RAIL (35 mm) Mounting
Dimensions
12.5(W)x99.7(H)x114.7(D) mm(for SOP)
17.5(W)x99.7(H)x114.7(D) mm(for DOP and
HART Pass)
Weight
100 gms Approx. For SOP model
130 gms Approx. For DOP model
Enclosure Material
PA66
Terminal Detail
Terminal type and cable
size
Screw type, 2.5mm
2