Mash Fifty 50 CC, Руководство пользователя

Страница: 29 / 66

29
Note:
After engine ignition and the engine runs, immediately release the starting
button, to avoid damaging the starter motor and starter clutch assembly.
If the engine does not start after 5 seconds, wait for at least 10 seconds before
making another attempt.
In case of a failure in engine starting after two or three attempts, rotate the
accelerator grip for 1/8 or 1/4 turns and try again.
A motorcycle not used for a
long time may suffer from ‘stale fuel’. In this case,
change the fuel in the tank before attempting starting.
Cold engine
Apply the choke lever as previously explained. After the engine is started, return
the lever half way and wait for the engine to become warmed-up, before
putting the lever to the original position. The colder it is, the longer the warm-
up time.
Warm engine
Rotate accelerator grip for 1/8 - 1/4 turns, and press the electric start button to
start the engine. When the engine is warm, it is not necessary to use carburetor
enrichment system.
Never start the engine in a room with poor or no ventilation. Carbon
monoxide gas is poisonous. Never leave the motorcycle unattended with a
running engine.
Precaution
Do not allow the engine run for a long time without driving, or the engine
may overheat causing damage to internal parts or chrome plating of exhaust
system.