Mash CITY 2.0 50cc, Руководство пользователя

Страница: 11 / 21

20 21
Back to summary
VI - Essentials of driving
Tank cap
To open the tank cap, you must open the trunk
of the scooter. To do this, insert the key in the
ignition and turn it anti-clockwise. The cap can
then be removed by hand. To replace the cap, line
up the arrows on the cap. Then close the trunk of
the scooter.
Fuel
Gas up
The fuel tank capacity is 5.4L. To fill your vehicle’s tank, put it on the main stand,
open the tank cap and fill the tank with fuel through the opening, then close the cap.
Warning
Do not overfill the reservoir. Never spray fuel on a hot engine. Fill the tank to
the lower level of the filler tube, otherwise fuel may overflow and expand with
increased temperature.
Turn off the engine and turn the key to the OFF position when filling the tank.
It is strictly forbidden to smoke or light a fire during this operation.
Engine start
Turn the ignition switch key to the ON position.
Turn the emergency stop switch key to the ON position.
Make sure there is fuel in the tank.
To start the engine
Start the engine by simultaneously pressing the engine start button (right stalk)
and pressing the left brake lever. It is recommended to stop pressing the start button
as soon as you hear the engine running. If you do not hear the engine does not start,
stop pressing the start button after 5 seconds and wait more than 5 seconds before
restarting.
Slightly twist the throttle about 1/8th turn but never more than 1/4 turn to increase
the air intake and restart the engine.
If the engine starts but stalls during idling when it is cold, run the engine at a higher
speed for 10 seconds or more to warm it up
Caution
Make sure the engine is off and away from any source of heat before filling
your fuel tank. Fuel will overflow if it rises above the level line.
Functioning
• Before starting the engine, make sure the side stand is folded down.
• If you cannot move the side stand easily, check that the stand is lubricated.
• To consume less fuel and ensure the longevity of your machine, do not be too
nervous when accelerating and decelerating.
Running-in
Following and applying the break-in instructions from the start will make your
scooter reliable with optimal performance. A proper break-in period prolongs the
life of your scooter. Please read the following table carefully.
0km to 500km: 50cc Speed ≤ 35km/h
500km to 2000km: 50cc Speed ≤ 45km/h
During the break-in period, avoid driving at the same speed for too long. During
the first 2000 km, it is advisable to drive with varying speed and engine speed.
Varying the speed will allow the engine to work at different loads and therefore
break in the full range of its capabilities.
The longevity of your engine will be increased.
Caution
• If you hear an abnormal noise while riding, contact a MASH dealer for
inspection and have the necessary action taken.
• Drive at a speed lower than the authorized speed.
• Avoid overloading the engine by opening the throttle fully and driving at
high rpm.
Démarrage au pied (kick)
Switch on the ignition, maintain pressure on the
left brake lever, deploy the starter pedal and turn
the throttle grip by an eighth or a quarter of a turn.
Press the kickstarter vigorously to start the engine.