Mash CITY 2.0 50cc, Руководство пользователя

Страница: 16 / 21

30 31
Back to summary
The correct tire pressure is essential for the safety
and driving of the scooter. Tire pressure should be
checked before each use. While driving the scooter, tire
temperature and pressure will change depending on speed
and load. For this reason, tire pressure should only be
checked and adjusted when the tires are cold. Normal tire
pressure (cold)
Tire pressure
Pression City 2.0, 50cc : Front - 2,25 bar / Rear - 2,25 bar
Warning
• Improper tire inflation will cause abnormal tread wear and pose a risk to
driver safety. Under-inflation may cause the scooter to skid or the tire to
come off its rim. The driver will then lose control of his vehicle.
• Never overload the scooter beyond the maximum recommended load.
• Overloading can damage the tires and affect the handling of the scooter.
• Remove any objects caught in the tire drawings.
• Check tire wear. If the tire is worn to the wear indicator or the rubber has
hardened, replace the tires immediately.
• The use of tires other than those mentioned in the technical specifications
may compromise the handling of the vehicle.
Spark plug
Carbon deposits and incorrect spark plug electrode spacing can cause the
engine to misfire. To clean the spark plug, use a specially designed tool or a wire
brush. After cleaning the spark plug, adjust the electrode gap to 0.6-0.7 mm.
Recommended spark plug: CR7HSA
Caution
The spark plug must be screwed in completely. A loose spark plug can overheat
and damage the engine.
Never use a spark plug with an unsuitable thermal resistance, as it could
seriously damage the engine.
Air filter cleaning
A clogged air filter will reduce engine power and increase fuel consumption. To
clean the air filter:
● Remove the screws from the air hose.
● Remove the screws securing the air filter cover and remove the cover.
● Replace or clean the filter element.
Caution
Inspect the element before installation. A damaged filter element will allow
dirt or dust to enter the motor and cause serious damage to the motor. Never
start the engine without first installing the filter element.