Mash 125cc X-RIDE, Руководство пользователя

Страница: 8 / 27

14 15
Back to summary
The ignition switch controls the ignition and lighting circuits and allows the steering
to be locked. Its various positions are described below.
IV - Ignition switch
Caution
Do not change the position of the key while driving.
The engine and motorcycle must be stopped before removing the key.
Position Fonction
Position (OFF) All circuits are off: the key can there -
fore be removed.
Position (ON) All electrical circuits are live: the en -
gine can therefore be started. The key, however,
cannot be removed.
To lock the steering, turn the handlebars to the left,
insert the key, push and turn it to the left until the
steering lock logo
Headlights - Position indicator
Turn the main ignition key to position , the headlights come on automatically.
11. Kilometers/Miles setting:
Ignition OFF, press and hold the “info” switch, then turn the key to ON (keeping the
info key pressed).
keeping the info key pressed). When the display is on, release the “info” switch.
A short pulse (minus 1 second) will switch from kms to miles.
A long impulse (3 seconds) will select “Sensor” and “ABS”. Make sure that these 2
parameters are in “kms” when the unit of measurement is the kilometer/hour.
The setting mode will be deactivated automatically after 5 seconds without action.
12. Adjusting the brightness of the display :
Info” switch: (within one minute after the key switch is turned ON) allows you to adjust
the brightness. 4 brightness levels that can be selected successively by short impulses
on the key switch