Maserati GRANCABRIO RANGE, Руководство пользователя

Страница: 31 / 262

B
C
D
E
D
C
H
H G
G
F
F J
B
D
2
29
Fitting child vehicle seats for
groups 0 and 0+
To carry children whose weight falls
in the 0 and 0+ groups, the child seat
must be fi tted facing backwards.
Carefully check that the brackets
B are
properly installed in their seatings D .
The child is then secured by the child
seat harness
E .
Fitting universal child seats
type 1
For proper installation of a forward-
facing universal Isofi x child seat,
proceed as follows:
- make sure that the release lever
C is
in its resting position (retracted);
- lift the guard F from the seat
backrest;
- remove the closing cushion G , to
access the upper anchoring bracket
H ;
- align the anchoring points D with
the brackets B , then push the child
seat until you hear the locking
clicks, which indicate it is secured in
place;
- check that the child seat is correctly
locked by trying to move it with
strength; the incorporated safety
mechanisms prevent the child seat
from being improperly fi tted if only
one of the attachment fi ttings is
locked;
- use the tether J to secure the child
seat backrest to the upper bracket
H , positioned in the centre of the
seat backrest.
This way, the child seat is restrained
not only by the brackets
B but also by
the vehicle vehicle seat belt and by
the upper tether
J .
Always refer to the instruction
manual provided with the child seat
for fi tting the vehicle seat belts to the
said child seat correctly.