PNEUMATIC PLANTER «FUTURA – FUTURA
Maxi
»
INSTRUCTION FOR THE USE AND MAINTENANCE
- 29 -
Pict. 40 – FUTURA SEEDS DISCHARGING
MOD:
FUTURA MAXI
The seed is discharged as in the model Futura,
but in addition, it is expected a seed-slide,
supplied to install as in the picture 41
Pic. 41 – FUTURA MAXI SEED DISCHARGING
4.8 TORQUE LIMITING DEVICE
Each shaft is supplied with a system, able to limit
the transmitted torque. Many times, because of
wrong manoeuvrings or for a bad functioning due
to not suitable regulation, there could be an high
quantity of torques, which could cause damages
to the planter.
In this cases the torque limiting device excludes
automatically the planter group from the
transmission.
Pict. 42 – TORQUE LIMITING DEVICE
4.9
REGULATING THE ELEMENT
“SUGAR BEET”
SOWING DEPTH:
By acting on the back handle (1 – Pict. 43) you
can regulate the sowing depth, from 0 to 5 cm
(p.s.. unblock and block again the nut 2 – pict. 40
before and after this operation). The indicator (3 –
Pict. 43) can be used to make uniform all the
elements. The press-seed wheel must be
regulated, by acting on the support handle (4 –
Pict. 43), screwing and unscrewing the two nuts.
Then through the support nuts, the height of the
share can be regulated. In case it can be lined to
the soil up through the two nuts (6 – Pict. 43)
blocking the share-support.
Pict. 43 – ELEMENT “SUGAR BEET”
4.10 GENERAL NORMS FOR THE
USE
A correct use of the planter, in accordance with
determined parameters, allows an high
performance level in the time and avoids
breakings.
