background image

 

 

3

NEVER 

run machine indoors or in an enclosed area such as a deep trench unless adequate 

ventilation is provided. Exhaust gas from the engine contains poisonous carbon monoxide gas; 

exposure to carbon monoxide can cause loss of consciousness and may lead to death. 

 

NEVER 

tamper with or disable the function of operating controls. 

NEVER 

use choke to stop engine.

 

NEVER 

operate the machine in areas where explosions may occur. 

ALWAYS 

remove or disconnect engine spark plug before servicing rammer, to avoid accidental 

start-up. 

ALWAYS

 read, understand, and follow procedures in Operator’s Manual before attempting to 

operate equipment. 

ALWAYS

 be sure that all other persons are at a safe distance from the rammer. Stop the machine if 

people step into the working area of the machine. 

ALWAYS

 be sure operator is familiar with proper safety precautions and operation techniques 

before using rammer. 

ALWAYS

 wear protective clothing when operating rammer. Wear goggles or safety glasses, 

hearing protection, and safety shoes. 

ALWAYS

 keep hands, feet, and loose clothing away from moving parts of rammer. 

ALWAYS

 use common sense and caution when operating rammer. 

ALWAYS

 be sure rammer will not tip over, roll slide, or fall when not being operated. 

ALWAYS

 turn engine OFF when rammer is not being operated. 

ALWAYS

 guide the rammer in such a way that the operator is not squeezed between the rammer 

and solid objects. Special care is required when working on uneven ground or when compacting 

coarse material. Make sure to stand firmly when operating the machine under such conditions. 

ALWAYS

 operate the rammer in such a way that there is no danger of it turning over or falling in, 

when working near the edges of breaks, pits, slopes, trenches and platforms. 

 

Operator Safety while using Internal Combustion Engines 

Internal combustion engines present special hazards during operation and fueling! Failure to follow 

the safety guidelines described below could result in severe injury or death. 
 

                         

                                                                                                                                                                                                         

DO NOT

 smoke while operating rammer. 

DO NOT

 smoke when refueling engine. 

DO NOT

 refuel hot or running engine. 

NO NOT

 refuel engine near open flame. 

DO NOT

 spill fuel when refueling engine. 

DO NOT

 operate rammer near open flames. 

 
 
 

Service Safety 

Poorly maintained equipment can become a safety hazard! In order for the equipment to operate 

safely and properly over a long period of time, periodic maintenance and occasional repairs are 

necessary. 

 

 

ALWAYS

 refill fuel tank in well-ventilated area. 

ALWAYS

 replace fuel tank cap after refueling. 

ALWAYS

 check fuel lines, fuel cap, and fuel 

tank for leaks and cracks before starting engine. 

Do not run machine if fuel leaks are present, or 

fuel cap or fuel lines are loose. 

WARNING

 

Содержание MR70H
















Отзывы:

Похожие инструкции для MR70H