Z3
QR20
27
14
A
33
17
16
FIG. 13 (only right leg)
Remove the stop ring
(33)
from pumping
element bottom
(14)
with a small flat
screwdriver.
Mark stop ring seat into inner rod for
proper fitting.
Use the same screwdriver to remove the
ring
(A)
and screw inner rod until adjuster
threaded end is disengaged from pump-
ing element.
Remove inner rod and replace O-ring
(27)
if damaged.
VALVE ASSEMBLY CHANGE
FIG. 14
To check that the valve assembly is oper-
ating correctly, it is necessary to work on
the inside of the stanchion tube.
Slip off the stop ring
(17)
using pointed
pliers.
Pull the valve assembly
(16)
out of the
tube with one finger in the same sequence
as in the figure.