Shiver
DC
35
C
ADJUSTMENTS
SPRING PRELOAD
Turning the adjuster knob
(35)
on top of
fork legs to adjust preload of spring for
COMPRESSION damping. The fork is set to
the minimum preload at the factory, i.e. the
knob will be completely unscrewed coun-
terclockwise. However, the springs are
slightly preloaded to help counteract static
loads. By turning the knob clockwise, the
preload is increased up to the maximum
value equal to
15 mm
of spring preload.
REBOUND
The adjuster screw
(C)
located on top of the
leg controls REBOUND damping. When
turning inside the cartridge rod, this ad-
juster will change the hydraulic configura-
tion of the inner valves. To adjust, always
start from the minimum damping setting,
i.e. with the screw fully turned counterclock-
wise.
IMPORTANT:
do not force the adjuster
screw
(C)
over its limit.
