Shiver
DC
3
3
Nm
11
RECOMMENDATIONS FOR
MAINTENANCE
M
ARZOCCHI
forks are based on advanced
technology, supported by year-long experi-
ence in the field of professional mountain
biking. In order to achieve best results, we
recommend to check and clean the area
below the dust seal and the stanchion tube
after each use and lubricate with silicone
oil.
In general,
M
ARZOCCHI
forks can offer top
performance from the start. However, in
some cases a short running-in period is
required (5-10 hours) for inner adjustments.
This running-in period will make fork life
longer and ensure fork top performance
over time.
IMPORTANT:
change oil at least every
100 operating hours.
INSTALLATION
Installing a
SHIVER
on a bicycle is a very
delicate operation that should be carried
out with extreme care.
• The installation should always be checked
by an authorized Service Center.
WARNING:
steering tube must be
installed and adjusted in compliance
with manufacturer’s instructions. Improper
installation may jeopardize the safety of the
rider.
• The fork is supplied with
“A-Head set”
steering tube to be cut according to
frame length.
• The steering tube is pressed into the
crown. To replace it, contact an author-
ized Service Center that will use the
required tools.
WARNING:
in case of improper
installation of the steering tube into
the lower Crown, the rider might lose con-
trol of his/her bicycle, thus jeopardizing
his/her safety.
FITTING FORK ONTO THE FRAME
• Check the tightening torque of the retain-
ing screws
(3)
before installing the fork
to the frame
.
