Super T
QR20
DISC BRAKE SYSTEM ASSEMBLY
Assembling the brake caliper onto the slider
is a very delicate operation that should be
carried out with extreme care.
Improper assembly might overstress the
caliper supports which might break.
When installing the disc brake system, be
sure to properly follow the instructions given
by the manufacturer.
FRONT WHEEL ASSEMBLY
IMPORTANT:
fixing the front wheel prop-
erly as specified in the instructions given
below is essential for the proper operation
of this fork and all related devices, and
therefore for safe riding. You are advised to
follow these instructions closely.
Slacken the lock nut of the quick release
lever so the hub will fit between the fork
sliders.
Make sure the quick release bushings
(A)
are centered to the recesses in the sliders.
Lock the quick release lever
(B)
and make
sure the bushings
(A)
are properly seated
in the sliders.
Fit bolt end
(C)
in suitable slider groove and
tighten the screw
(D)
to specified torque.
WARNING:
These sliders are spe-
cifically designed to fit this type of
hub. Do not use any hub design other than
that specified here, as this would not ensure
proper fastening of the wheel and may lead
to breakdown of the assembly components.
Nm
6
B
D
B
C
A
A
C
