2022-09-08
9
Sliding Door Automatic Control Device
19916437
Installation Instructions
6.
Insert the AC power cord into the bottom of the
control box and plug the other end into a standard 110v/
15 amp dedicated circuit.
A T T E N T I O N
The
on hard wiring should only be done by a
licensed electrician.
7. Optional Hardwire
: Remove the two screws from
the power port on the control box to access internal
wiring.
Connecting Components
1.
Attach the blue female cable crimp connectors to the
14-2 cable from the control box.
.
Figure 17
2. Control Box to Motor:
the red Super Cable
connects to the corresponding port on the motor. Red
and black female leads from the motor to the black and
white male leads from the control box.
Figure 18
3. Wall Switches:
Connect the blue CAT5e from the
"out" port on the wall switch to the corresponding wall
switch port on the motor or control box. Additional wall
switches can be added to the “in” port on the wall switch
(daisy chain).
Figure 19
1
Ensure a solid crimp
1
Wall switch "out" port.
