10
TROUBLESHOOTING GUIDE
FAULT
POSSIBLE CAUSE
SUGGESTED CORRECTION
After the Brewer had been plugged in
and powered on, no lights will illumi-
nate and brewing will not start.
If the Brewer has been idle for more
than 5 minutes, it will automatically
shut down.
Press the POWER Button on the
Brewer to start use.
The Brewer stopped and the POWER
Button is flashing red.
The Brewer is either out of water or
the Water Tank has been removed.
Refill and replace the Water Tank and
press the POWER Button. The brew
cycle will continue brewing at the point
at which it was interrupted and will
dispense the volume of liquid to
finish the original cup size which was
selected.
The POWER Button and all Cup Size
Buttons are flashing red.
The decorative front cover is open.
Fully close the decorative front cover
and the flashing lights should stop.
The cover should never be opened
during brewing, but if this occurs the
brew cycle will resume immediately
after the front cover is closed.