Marvel MPWD424 Скачать руководство пользователя страница 14

Страница: 14 / 44

USING YOUR ELECTRONIC CONTROL

Control Function Guide

Function

Command

Notes

ON/OFF

Press and release.

Unit will immediately turn ON or OFF.

Adjust Temperature

Press or and release.

When the display is flashing, press or to adjust the set

point temperature. Note: temperature displayed is the actual
temperature inside unit.

Toggle Between oF / oC

Hold and for 5 seconds.

The display will change units.

Leave Interior Light On

Press and release to leave interior light on for
12 hours; press again to deactivate.

After 12 hours, factory default is restored; light will turn on when
door is open.

Hide Display

Hold and press .

Display will turn off when door is closed. Unit will continue to

operate. Repeat command to turn on display.

Adjust Light Color

Press and hold then press and wait for

UI to flash. Once UI flashes, release and ,

and use the to scroll through options 0-2.

Option Open Door Closed Door

White White

Blue Blue

White Blue

Light will be set at full intensity when door is open, and 50%
intensity when door is closed.

Enable Sabbath Mode

Press and hold for 5 seconds and release.

The oF / o

C symbol will flash briefly after 5 seconds. Interior

light and display will go dark and remain so until user resets
mode - unit continues to operate.

Disable Sabbath Mode

Press and release. Display and interior light return to normal operation.

Showroom Mode

Hold and for 5 seconds.

The oF / o

C symbol will flash. Display will be lit and interior light

will function.

Unit will not cool.

Repeat command to return to

normal operation.

Door Alert Notification

When the door is left open for more than 30 minutes:

•

A tone will sound for several seconds every minute

•

will appear in display

•

Close door to silence alert and reset

First Use

Initial startup requires no adjustments. When plugged in, the unit will

begin operating under the factory default settings. If the unit was turned off

during installation, simply press and the unit will immediately switch on.

To turn the unit off, press .

Temperature displayed reflects actual temperature inside unit. If the
temperature displayed is different than selected, the unit is progressing

towards the selected temperature. Time to reach set point varies based
upon ambient temperature, temperature of product loaded, door openings,
etc. Marvel recommends allowing the unit to reach set points before
loading.

NOTE

Figure 29

Electronic control

Содержание MPWD424













































Результаты поиска

Содержание MPWD424

Отзывы:

Похожие инструкции для MPWD424

Бренды по названию

Популярные бренды

Marvel MPWD424, Руководство пользователя

Результаты поиска

Содержание MPWD424

Отзывы:

Похожие инструкции для MPWD424

Бренды по названию

Популярные бренды