Marvel MPCP415 Скачать руководство пользователя страница 27

TROUBLESHOOTING

Plumbing Problems

Is the drain hose aligned over the drain

? Move the ice 

machine to align the drain.

Is the ice machine draining properly

? Check that there 

are no kinks or restrictions in the drain lines; this can 
cause water to back up in the ice bin. Check that foreign 
material is not blocking the ice bin drain located at the 
right rear corner of the ice bin. Check the drain pump 
discharge and vent line or any restrictions or kinks. Check 
that the drain pump is level.

they cannot be repaired by the service technician. A 

Ice Quality

Is there mineral scale build up on the evaporator 
plate

Is there a high mineral content in the water

? The water 

Are food items being stored in the ice bin

? Remove 

food from the ice bin.

Unpleasant Odors 

on the water supply line.

Clumps of ice 

Are there clumps of ice in the bin

? If the ice isn’t used 

on a regular basis it will melt and form into clumps. Break 
up the ice clumps with the ice scoop.

Ice cubes are too big or too small

Is there low ice consumption

? Ice is slowly melting in 

will return to the regular size.

Is the ice slab releasing

? Clean the evaporator. See 

Is the distributor tube restricted

? Check the water line 

to the ice machine to make sure there are no restrictions 

Troubleshooting the Drain Pump

If the 

drain pump reservoir

 (not the ice machine bin) 

If the ice machine is not working, check the following:

Make sure there is power at the receptacle.

Make sure the ice machine is turned on.

Make sure the ice bin is not full.

Then check the drain pump:
The pump does not run:

Make sure the pump is plugged in and there is power
to the receptacle.

Check the inlet to the drain pump for debris and clean
as needed. Remove clamps and inlet tube from drain
pump to check for and remove debris.

Make certain the vent line is free of kinks/sharp bends
or restrictions.

Make certain there is enough water to activate the

of water to activate the drain pump.

The pump runs, but no water is pumped out:

Check that the vent is clear and free of restrictions.

Check the discharge line to make certain there are no
restrictions.

Make sure that the discharge tubing has not exceeded
the maximum lift of eight (8) feet (2.44 meters) and the
horizontal run is not greater than twenty (20) feet (6.1
meters).

Check to make certain the drain pump is level.

Check that the vent is clear and free of restrictions.

The ice machine is running but not producing ice:

Check to make sure water is not backing up in the ice
bin.

NOTE

NOTE

27

Содержание MPCP415










































Отзывы: