-15-EN
Assembling the spray gun
Warning
Securely connect the spray gun and spray
wand. If not, the spray wand may fly off,
cause accidents or injuries.
Straight into the spray wand to the
spray gun, tighten firmly by hand by
turning clockwise the swivel of the
spray gun.
If the spray wand is not plugged into
smoothly, apply a small amount of
water or diluted detergent to the inner
diameter part of the connection
thread.
Caution
Do not touch the male thread at the connection part with bare hands. It may cause injuries. Wear
protective gloves when connecting the thread.
Installing the high-pressure hose
Warning
Securely connect the high-pressure hose. If the hose is disconnected, accidents and injuries may
occur.
Caution
Do not touch the male thread at the connection part with bare hands. It may cause injuries. Wear
protective gloves when connecting the thread.
Remove the bending and twisting of the high-pressure hose.
Straight into the high-pressure hose to the pump discharge port and spray gun connection port, and
tighten firmly by hand by turning clockwise swivel of the high-pressure hose.
If the high-pressure hose is not plugged into smoothly, apply a small amount of water or diluted
detergent to the inner diameter part of the connection thread.
If the connected high-pressure hose is twisted, remove the twists by extending the hose straight while
turning the spray gun.
If the connected high-pressure hose is still twisted, loosen the swivel on the spray gun side and extend
the hose straight once again by turning the spray gun.
When the high-pressure hose is free from twists, re-tighten the swivel.
Spray gun
Swivel
Spray wand
Spray gun
Swivel
Swivel
Pump
discharge
port
High-pressure hose
High-pressure hose