2.
Rotate the cold start lever about a quarter turn
clockwise to the locked position. Do not depress
the throttle trigger. Depressing the throttle trigger
before the engine starts will automatically return
the cold start lever to the off position.
Cold Start
Lever
Starter Grip
� �/Stop Switch
Throttle Trigger
3.
Set the engine stop switch to the "ON" position.
Pull the starter grip until engine starts. Once the
engine is running, depress and release the throttle
trigger quickly to automatically return the cold
start. lever to the off position.
If
the engine stalls
before you depress the throttle trigger, depress and
release the throttle trigger to return the cold start
lever to the off position, then pull the starter grip
until the engine starts.
Hot Restart
To start an engine that is already warmed up (hot
restart), or if the ambient temperature exceeds 68°F
(20
°
C):
l. Pump the primer bulb at the bottom of the carbu
retor until fuel can be seen flowing through the
fuel return line to the fael tank.
2.
Set the engine stop switch to the "ON" position
pull the starter grip until the engine starts.
3.
If
the engine fails to start after three to four pulls,
follow the instructions in the Co ld Starting
Procedure section above.
If the engine fails to start after you follow the
above procedures, contact an authorized
Maruyama dealer.
To Stop The Engine:
I.
Release the throttle trigger.
2.
Slide the stop switch to the "STOP" position.
Idle Speed Adjustment
This HedgeTuimmer is equipped with a non-adjustable
fuel mixture carburetor. The engine idle speed is
the only adjustment for the operator.
-14-
