Maruyama EH27D, Руководство владельца/оператора

Страница: 13 / 82

−
US-12
−
ON SHAFT
(Part No. 217879)
Safety Decals
Safety Decals are easily visible to the operator and are located near any
area of potential danger.
Replace any decal that is damaged or lost.
Assembly
Assembling Engine and Drive Shaft Assembly
Attach the clutch drum housing to the engine using the four screws supplied
with the unit.
Connecting Throttle Cable and Stop Switch Wires
1. Loosen the knob and remove the air cleaner cover, insert the throttle cable
through the cabrburetor bracket, then screw a cable adjuster sleeve into the
carburetor bracket fully.
2. Position the slotted fitting on the carburetor so the recessed hole for the lug
is away from the cable adjuster sleeve.
3. Rotate the carburetor throttle cam and slip the throttle cable through the
slot in the slotted fitting, making sure the cable lug drops into the recessed
hole.
4. Operate the throttle trigger a few times to make sure that it works correctly.
Engine
Screw (4)
Clutch Drum Housing
Cable Adjuster Sleeve
Throttle Cable
Slotted Fitting
Cable Lug
Recessed Hole
Carburetor
Bracket
Locknut
Air Filter Cover
Knob
Matching Connectors