A
SAFETY INSTRUCTIONS
A
1.Read and understand this Instruction Manual before using the
equipment. Be thoroughly familiar with the proper use of the
Power Edger.
2.Never allow children to operate the Power Edger. It is not a
toy. Never allow adults to operate the unit without first
reading the Instruction Manual.
3.Become familiar with tte controls and know how to
stop
the
engine quickly.
- 4 .ALWAYS WEAR SAFETY GLASSES or other suitable ·eye protection,
and hearing protection.
5.Keep the area of operation clear of all persons, particularly
small children ·and pets.
6.Never operate a Power Edger when you are fatigued.
7. Never operate a Power Edger without proper guards or other
protective safety devices in place.
8. Dress properly; do not wear loose clothing or jewelry. They
can. be caught in moving parts. Always wear substantial
_footwear, long pants, and long sleeved shirt •
. :9.Gasoline is highly flammable; handle it carefully. Fill the
fuel tank with the correct mixture of gasoline and oil before
trying to start the engine.
A.Use an approved fuel container for storing the gasoline/oil
mixture.
B.Do not fill the tank when the engine is hot or running.
C.Do not smoke while handling gasoline.
D. Fill the fuel tank outdoors and up to about one-half inch
from the top of the tank, not the top of the filler neck.
E.Wipe any spilled gasoline before starting the engine.
10 .Always be sure of your footing; keep a firm hold of the
handles with both hands, and walk, never run.
11. use the right tool for the job. Do not use the Power Edger
for any job that is not recommended by the manufacturer.
12. Keep all fasteners tight to be sure the Power Edger is in
safe working condition. Follow the maintenance instructions
provided on page 9 to 11 of this manual.
13 .Do not put hands or feet near or under any rotating parts.
Keep clear at all times.
14. If the Power Edger should start to vibrate abnormally, stop
the engine and check immediately for the cause. Vibration is
generally a warning of trouble.
15 .Avoid using the Power Edger near rocks, gravel, stones and
similar material that would cause harmful missiles.
16.Use the Power Edger only in daylight or good artificial
light.
17. Shut off the engine and be certain the cutting blade has
completely stopped rotating before inverting the machine.
-2-
