manualshive.com logo in svg

Maruyama BL3200, Руководство владельца/оператора

Поделиться
Скачать
Maruyama BL3200 Скачать руководство пользователя страница 19

GENERAL CLEANING AND TIGHTENING

The Maruyama Handheld Blower will provide maximum performance for many, many hours if it is
maintained properly. Good maintenance includes regular checking of all fasteners for correct tight-
ness, and cleaning the entire machine.

— 18 —

STORAGE

For long term storage of the Handheld Blower:

1.

Empty the fuel tank into a suitable fuel stor-
age container approved for gasoline.

2.

Pump the primer bulb on the carburetor until
all fuel is discharged through the clear fuel
return hose.

3.

Run the engine to remove any fuel that may
remain in the carburetor.

4.

Perform all regular maintenance procedures
and any needed repairs.

5.

Remove the spark plug and squirt a very small amount of oil into the cylinder.

6.

Pull the starter grip once.

7.

Slowly pull the starter grip to bring the piston to the top of the cylinder (TDC).

8.

Reinstall the spark plug.

9.

Store the Handheld Blower in a dry place away from excessive heat, sparks or open flame.

WARNING

POTENTIAL HAZARD
• When engine is running, fan is rotating and other parts are moving.
WHAT CAN HAPPEN
• Contact with rotating fan or other moving parts could cause serious personal injury or

death.

HOW TO AVOID THE HAZARD
• Always turn off your Handheld Blower before you clean or perform any maintenance on it.

CAUTION

POTENTIAL HAZARD
• Oil may squirt out of the spark plug opening when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face away from the spark plug opening.

Содержание BL3200






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды