MARUTI SUZUKI Alto Скачать руководство пользователя страница 164

Страница: 164 / 243

5-59

OTHER CONTROLS AND EQUIPMENT

53MH0-74E

Listening to a CD

When a CD is inserted, playback will auto-

matically start.

When a CD is already inside the unit,

press the Media Source Mode button (3) to

select CD mode and to start playback.

Selecting a track

Press the Up button (4) to listen to the next

track.

Press the Down button (5) twice to listen to

the previous track. When the Down button

(5) is pressed once, the track currently

being played will start from the beginning

again.

Fast forwarding/Rewinding a track

• Hold down the Up button (4) to fast for-

ward the track.

• Hold down the Down button (5) to fast

rewind the track.

Track scan play

Press the SCAN button (9). The first 10

seconds of each track in the disc is played

in sequence.

NOTE:

To cancel the scan play, press the SCAN

button (9) again or switch to another mode

or turn the power off, or eject the disc.

Random playback

Track Random

Press the RDM button (7). Each time the

button is pressed, the mode will change as

follows:

53M-07-067

The random indicator “RDM” will light.

The tracks in the loaded disc will be played

in random order.

NOTE:

• To cancel random playback, press the

RDM button (7) again or eject the disc.

Repeat playback

Track Repeat

Press the RPT button (8).

Each time the button is pressed, the mode

will change as follows:

53M07068

The repeat indicator “RPT” will light.

The track currently being played will be

played repeatedly.

NOTE:

• To cancel repeat playback, press the

RPT button (8) again or eject the disc.

Display change

Press the DISP button (8).

Each time the button is pressed, display

will change as follows:

53M-07-069

Press the DISP (6) for 1 second or

longer.

Each time this button is pressed, the dis-

play switches as follows.

First 8 character next 8 characters.

A total of 16 characters can be dis-

played.

• it the number of character is 8 or less,

display doesn’t switch.

• If the disc/track name is not recorded on

the disc, “NO TITLE” will be displayed.

Содержание Alto




















































































































































































































































Результаты поиска

Содержание Alto

Отзывы:

Похожие инструкции для Alto

Бренды по названию

Популярные бренды

MARUTI SUZUKI Alto, Руководство пользователя

Результаты поиска

Содержание Alto

Отзывы:

Похожие инструкции для Alto

Бренды по названию

Популярные бренды