MARUTI SUZUKI Alto Скачать руководство пользователя страница 57

Страница: 57 / 243

2-34

BEFORE DRIVING

53MH0-74E

Driver’s Seat Belt Warning Light /

Front Passenger’s Seat Belt Warn-

ing Light

53M-04-073

When the driver or front passenger does

not buckle his or her seat belt, this light will

come on and/or blink.
For details about the seat belt reminder,

refer to “Seat Belts and Child Restraint

Systems” in this section.

“AIR BAG” Light

53M-04-074

This light blinks or comes on for several

seconds when the ignition switch is turned

to the “ON” position so you can check if the

light is working.
The light will come on and stay on if there

is a problem in the air bag system.

Anti-Lock Brake System (ABS)

Warning Light

65D529

When the ignition switch is turned to the

“ON” position, the light comes on briefly so

you can check that the light is working.

If the light stays on, or comes on when

driving, there may be something wrong

with the ABS.
If this happens:

1) Pull off the road and stop carefully.

2) Turn the ignition switch to “LOCK” and

then start the engine again.

If the warning light comes on briefly then

turns off, the system is normal. If the warn-

ing light still stays on, something is wrong

with the system.
If this light and the brake system warning

light stay on, or come on simultaneously

when driving, there may be something

wrong with both the rear brake force con-

trol function and anti-lock function of the

ABS system.

If one of these happens, have the system

inspected by a Maruti Suzuki authorised

workshop.
If the ABS becomes inoperative, the brake

system will function as an ordinary brake

system that does not have this ABS sys-

tem.

Malfunction Indicator Light

53M-04-075

Your vehicle has a computer-controlled

emission control system. A malfunction

indicator light is provided on the instrument

panel to indicate when it is necessary to

have the emission control system serviced.

The malfunction indicator light comes on

when the ignition switch is turned to “ON”

position to let you know the light is working

and goes out when the engine is started.

WARNING

If the “AIR BAG” light does not blink

or come on briefly when the ignition

switch is turned to the “ON” position,

stays on for more than 10 seconds,

or comes on while driving, the air bag

system may not work properly. Have

both systems inspected by a Maruti

Suzuki authorised workshop.

ABS

Содержание Alto




















































































































































































































































Результаты поиска

Содержание Alto

Отзывы:

MARUTI SUZUKI Alto, Руководство пользователя, Страница: 57 / 243

Результаты поиска

Содержание Alto

Отзывы: