Maruson UltimaPro 33 HV 10K, Руководство пользователя

Страница: 37 / 50

34
MISCELLANEOUS
DATALOG INFO SETTING MEASURE CONTROL HOME
20KVA
Bypass Mode
19:52:36
2018-11-07
ELECTRONIC
BATTERY
MISCELLANEOUS
Auto Restart
Shutdown Delay
Restore Delay
New Password
0min
Enable
0min
****
DefaultUserPassword NO
UPS SELFTEST
Miscellaneous setting page

Auto Restart:

Enable: After “Enable” is set, once UPS shutdown occurs due to low battery and then utility
restores, the UPS will return to line mode.

Disable: After “Disable” is set, once UPS shutdown occurs and the utility restores, the UPS will
not automatically turn on.

Shutdown Delay Min: UPS will shut down in setting minutes. The countdown will start after confirming
the pop-up screen.

Restore Delay Min: UPS will automatically restart in setting minutes after the UPS shuts down.

New Password: Set up User new password to enter “ADVANCE

User” menu page.

DefaultUserPassword:

YES: If “YES” is selected, User password will restore default setting value.

NO: If “NO” is selected, the UPS will cancel this operation.
UPS SELFTEST
unknown R-Phase
PFC Test Step:
0 0
INV Test Step:
S-Phase
T-Phase
unknown
unknown
unknown
unknown
unknown R-Phase
S-Phase
T-Phase
This function is only effective when UPS type setting is “HV”. Therefore, please disconnect all loads and
utility first before executing this function. Then, please change UPS type to “HV”. For the detailed operation,
please check “System Parameter” menu under Advance

Maintainer directory.
After changing UPS type to “HV”, you have to restart the UPS. After the UPS is restarted, please enter
Advance screen and enter Maintainer password. It will show “UPS SELFTEST” selection in the screen. In the