6
1 Introduction
Thank you for selecting UPS to protect your electrical equipment. The UPS has been designed
with the utmost care.
We recommend that you take the time to read this manual to take full advantage of the many
features of your UPS (Uninterruptible Power System).
Before installing your UPS, please read the booklet presenting the safety instructions. Then
follow the indications in this manual.
1.1 Environmental protection
Products are developed according to an eco-design approach.
Substances
This product does not contain CFCs, HCFCs or asbestos.
Packing
To improve waste treatment and facilitate recycling, separate the various packing
components.
•
The cardboard we use comprises over 50% of recycled cardboard.
•
Sacks and bags are made of polyethylene.
•
Packing materials are recyclable.
Follow all local regulations for the disposal of packing materials.
Product
The product is made up of recyclable materials.
Dismantling and destruction must take place in compliance with all local regulations
concerning waste. At the end of its service life, the product must be transported to a
processing center for electrical and electronic waste.
Battery
The product contains lead-acid batteries that must be processed according to applicable
local regulations concerning batteries.
The battery may be removed to comply with regulations and in view of correct disposal.
1.2 Electronic equipment protection
The uninterruptible power system (UPS) protects your sensitive electronic equipment
from the most common power problems, including power failures, power sags, power
surges, brownouts, line noise, high voltage spikes, frequency variations, switching
transients, and harmonic distortion.
Power outages may occur unexpected, and the power quality will be erratic. These power
problems have the potential to corrupt critical data, destroy unsaved work sessions, and
damage hardware - causing hours of lost productivity and expensive repairs.
With the UPS, you can safely eliminate the effects of power disturbances and guard the
Содержание Tacoma II Series
