10
6.
To attach the
speaker to the
surface mount
bracket base:
a)
First hand
thread the twist
c a p t o t h e
surface mount
bracket base .
b)
Now firmly
t i g h t e n t h e
twist cap with
the provided
wrench .
5.
T h r e a d t h e
speaker wire
t h r o u g h t h e
c e n t e r h o l e
and out of the
wire opening
on the surface
mount bracket
b a s e . P l a c e
surface mount
bracket base
flush against
the surface you
wish to install
your speaker . To
attach surface
mount bracket
b a s e t o t h e
s u r f a c e , u s e
a p p r o p r i a t e
screws (not supplied) for your installation .
For specifications
on screws, see your dealer for details.
Note:
For a wall mounted installation where a wire connection
is contained within the surface mount bracket base, please
follow these instructions . It is recommend that the speaker wire
be cut short and the wire sleeve should be removed to expose
the red (+) and black (-) wires . Follow steps
6 a-b
, but do not
attach the assembled speaker with surface mount bracket base
until your wire connections are made with silicone-filled wire
connectors covering the exposed wire connections . The wire
connections with silicone- filled wire connectors must be stuffed
inside the surface mount bracket base before attaching to the
desired surface with appropriate screws (not supplied) for your
installation . For specifications on screws, see your dealer for
details .
a)
b)
For wiring instructions see
‘Speaker &
Burial Cable Connections’
on page 11 .
