MartinLogan Depth I, Руководство пользователя

Страница: 7 / 28

Controls and Connections 7
configuration of your listening environment, the placement
of the unit, and your seating arrangement. Due to the way
bass sound waves develop in different rooms, there is no rule
of thumb for setting phase. For instance, if your room has
a peak at the subwoofer crossover area, you may wish to
set the phase so the actual acoustic outputs of the subwoofer
and main speakers are out of phase. Experiment, try dif-
ferent settings and be patient.
Power
The Auto/On/Standby switch controls Depth i’s energy sav-
ing feature. When set to 'Auto', the Depth i will turn on
when a music signal is detected and off when there is none.
The 'On' setting prevents the Depth i from entering energy
saving mode. The 'Standby' setting forces the Depth i into
energy saving mode. While set to 'Standby’, the Depth i will
not operate.
25Hz Hz Level
The 25Hz Level knob significantly adjusts frequen-
cies where peaks and dips of different amplitudes often
manifest in real world environments. The ideal setting is
dependent on room size and construction, system con-
figuration and personal preference.
High Pass Filter: Out
The High Pass Filter: Out control filters the signal output
from the Right Out and Left Out connections.
Status Light
See descriptions of the status light on page 8. The top con-
trol panel status light functions identically to the back plate
status light.
Figure 2 . Graph demonstrating the frequencies effected by the 25Hz
Level controls