© Martin Engineering GmbH
22
M3625UK-10/15
Installation
14. Push the sensor roller unit into the guide unit from both sides
(Fig. 12).
15. Install the sensor roller unit about 6 mm away from the edge of
the conveyor belt. Secure the sensor roller unit with the arrest-
ing screws (1, Fig. 13).
DANGER! LOADS FALLING DOWN!
The tracker may fall down and lead to severe injuries
or to death.
For systems installed overhead, the system must be secured with
safety cables (not included in the scope of supply) at suitable sup-
ports!
NOTE
Ensure that the guide unit and the entire construction can be
moved freely. Proper working cannot be ensured otherwise.
Fig. 13: Installing and securing the sensor roller unit
6 mm
6 mm
1
