© Martin Engineering GmbH
14
M3625UK-10/15
Installation
5.2
Installation procedure
5.2.1
Determining the installation position
Lower tracker unit
1. Determine the point from where the conveyor belt runs without
being centred.
2. Install the tracker unit at a distance of three to four times the
conveyor belt width in front of the point determined (for subse-
quent steps of installation, see Chapter 5.2.2).
Upper tracker unit
1. Install the tracker unit behind the loading zone (for subsequent
steps of installation, see Chapter 5.2.3).
or
1. Determine the point from where the conveyor belt runs without
being centred.
2. Install the tracker unit at a distance of three to four times the
conveyor belt width in front of the point determined (for subse-
quent steps of installation, see Chapter 5.2.3).
NOTE
If multiple units are being used, install these at a distance of 20-50
m from one another.
The distance depends on the extent of skewing of the conveyor
belt and must then be determined from case to case.
