14
Stage Cyclo user manual
Stand-alone operation
In stand-alone operation, the Stage Cyclo can be used without a DMX
controller. Static single colors or two-color mixes can be displayed, or
fixtures can be programmed to change colors in cycles. Changes can be
programmed at 1, 5, 10 or 30 second intervals.
Two stand-alone operation modes are available:
• In
single stand-alone operation
, fixtures run independently of each
other. No data link is required.
• In
master/slave stand-alone operation
,
fixtures must be linked.
Synchronized action in all fixtures is triggered by one “master” fixture.
Programming single and
master/slave stand-alone
operation involves setting the
pins on the fixture’s DIP
switch. The DIP switch is
protected behind a sliding
cover on the back of the
fixture’s housing. To access
the switch, pull the knob in
the connections panel recess
(see illustration) and slide
open the cover.
An overview of the DIP switch settings is provided on the next page. A quick
reference table covering DIP switch functions is also provided on the back
cover of this manual.
Figure 9: Dip switch access
Содержание Stage Cyclo
