Martin RoboScan Pro 918, Руководство пользователя

Страница: 21 / 31

21 RoboScan Pro 918
G o b o o r i e n t a t i o n
When installing coated glass gobos, the coated side should face out towards the mirror for best focus. Glass gobos may
be inserted with the coated side towards the lamp if required for proper projection.
Textured glass gobos must be installed with the smooth side facing the lamp.
Text and image gobos, for correct projection, must be installed with the image facing the mirror.
C
H A N G I N G C O L O R F I L T E R S
1. Remove the effects section cover as described above.
2. Manually turn color wheel 1 so the desired filter is accessible.
3. Using a soft cloth or gloves, gently tilt the outside edge of the filter towards the mirror and remove.
4. To place a filter in the wheel, insert the plastic holder between the spring clip - with the protruding tab facing
the lamp - until it snaps into place.
L
A M P R E P L A C E M E N T
Discharge lamps operate under high pressure. As the lamp ages, the glass envelope becomes more fragile. To reduce
the risk of the lamp exploding, which may cause damage to the fixture, do not exceed the rated average life by more
than 25 percent. The procedure for installing the lamp is described on page 5. After installing the lamp, reset the lamp
usage counters as described under “Readouts” on page 11.
O
P T I M I Z I N G L A M P A L I G N M E N T
1. Disconnect the fixture from AC power and allow to cool.
2. Make a preliminary adjustment: remove the lamp assembly and turn the 3 lamp adjustment screws with a 3
mm Allen wrench to position the lamp socket plate a distance of 38 mm (1.5”, outside measurement) from
the access plate as shown below.
3. Replace the lamp assembly.
4. Apply power to the fixture and allow it to reset.
C
o
a
ted
Gl
ass
:KHQýDQýREMHFWýLVýKHOGýXSýWRýWKHýXQFRDWHGýVLGHñý
WKHUHýLVýDýVSDFHýEHWZHHQýWKHýREMHFWýDQGýLWVý
UHIOHFWLRQïý7KHýHGJHýRIýWKHýJRERýFDQýEHýVHHQý
ZKHQýORRNLQJýWKURXJKýWKHýXQFRDWHGýVLGHïý
Coated side towards mirror Uncoated side towards lamp
:KHQýDQýREMHFWýLVýKHOGýXSýWRýWKHýFRDWHGýVLGHñýWKHUHýLVý
QRýVSDFHýEHWZHHQýWKHýREMHFWýDQGýLWVýUHIOHFWLRQïý7KHý
HGJHýRIýWKHýJRERýFDQQRWýEHýVHHQýZKHQýORRNLQJý
WKURXJKýWKHýFRDWHGýVLGHï
Textured side towards mirror
Stru
c
tured
Glas
s
Smooth side towards lamp
Imag
e G
o
b
o
s
Correct image towards mirror Reversed image towards lamp