9
Installation
For independent control, each fixture must have its own address and control channels. Two
or more RoboScan Pro 518s may have the same address; however, they will receive the
same instructions and behave identically.
Martin mode: The RoboScan Pro 518 uses 1 channel to communicate with the controller.
The address may be any channel between 1 and 32.
DMX mode: The RoboScan Pro 518 may be operated in 3 DMX modes; see the DMX pro-
tocol starting on page 18 for details. It uses 7 consecutive DMX channels in mode 1, and 9
consecutive DMX channels in modes 2 and 3. The factory default is mode 3. The address
may be any channel up to 504 within the controller’s range (506 if 7 channels are used).
Example: 4 Pro 518s using mode 3 can be addressed as follows:
Use the following procedure to set a Martin or DMX address.
1.
Select an available address within the controller’s range.
2.
Find the DIP-switch setting in the address table on page 23.
3.
Set the DIP-switch by flipping pins 1 through 9 ON or OFF as listed in the
address table. Flip pin 10 to OFF.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Pro 518 No. 1
Address: 1
Pro 518 No. 2
Address: 10
Pro 518 No. 3
Address: 19
Pro 518 No. 4
Address: 28
Phase Reversing
Cable
Male
Female
1
2
3
1
2
3
3-pin to 3-pin
Connections
P/N 11820006
Phase Reversing
Cable
Male
Female
1
2
3
4
5
5-pin to 3-pin
Connections
P/N 11820003
Phase Reversing
Cable
3-pin to 5-pin
P/N 11820002
1
2
3
Male
Female
Connections
1
2
3
1
2
3
4
5
Содержание RoboScan Pro 518
Страница 1: ...RoboScan Pro 518 user manual...
Страница 24: ......
