Martin RoboScan 812, Руководство пользователя

Страница: 3 / 19

3 I n t r o d u c t i o n
s e c t i o n 1
I N T R O D U C T I O N
Thank you for selecting the Martin RoboScan 812. It is designed and built to be bright, reli-
able and easy to use. With proper setup and maintenance, the RoboScan 812 will provide
years of trouble-free operation.
Read this manual before operating the RoboScan 812. Safety hazards or damage to the fix-
ture may occur if it is handled or operated incorrectly. For your protection and other’s,
always follow the safety precautions listed below and observe the warnings in this manual
and printed on the fixture. If you have questions about how to operate and service the fix-
ture, please contact your Martin dealer for assistance before proceeding. Refer any service
not described in this manual to a qualified Martin technician.
This manual covers the RoboScan 812 with software version 2.8 or higher. The latest infor-
mation on the RoboScan 812 is always available from your dealer and the Martin web site
at http://www.martin.dk.
S A F E T Y P R E C A U T I O N S
• The RoboScan 812 is NOT for domestic use.
• For protection against dangerous electric shock, always ground (earth) the fixture
electrically, use only a source of AC power that complies with local building and elec-
trical codes, and do not expose the fixture to rain or moisture. Disconnect the fixture
from AC power before removing any cover or part.
• Disconnect the fixture from AC power if the lamp blows. Allow the fixture to cool for
10 minutes before installing a new lamp.
• Do not illuminate surfaces within 30 cm (12 inches) of the fixture.
• Do not place filters or other objects over the lens or mirror.
• Keep all combustible materials (for example fabric, wood, paper) at least 10 cm (4
inches) away from the fixture. Keep flammable materials well away from the fixture.
• Provide a minimum clearance of 10 cm (4 inches) around the fan and air vent.
• Do not operate the fixture if the ambient temperature exceeds 40° C (104° F).
• When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices and secure the fixture with an
approved safety cable. Block access below the work area whenever installing or
removing the fixture.
• For protection against dangerous UV radiation, never operate the fixture with missing
and/or damaged covers or lenses installed and do not stare into the light. Replace any
broken or cracked component immediately.
• Refer all service to a qualified technician.
812C.fm Page 3 Monday, September 3, 2001 4:23 PM