Martin Magnum Pro 2000, Руководство пользователя

Страница: 7 / 12

Operation 7
O
PERATION
3
For optimum performance from your Magnum 2000:
• Keep the machine and the remote control unit away from damp rooms or wet
conditions.
• Never operate the machine without fluid in the tank, as this may harm the pump
system.
• Use clean fluid to avoid clogging of the heating element and damage to the pump.
• Use Martin fog fluid. This fluid is non- toxic, water-based and specially designed
for Martin smoke machines. Jem “Pro-Smoke” fluids may be substituted.
( R E M O T E ) C O N T R O L U N I T
The control unit is secured to the back panel by two thumbscrews. It may be
removed for remote control and placed in a rack or on a table.
T o r emo v e t h e c on t r o l u n i t
1 Unscrew the thumbscrews on either side of the control unit and pull it out of
the control unit well.
2 Use the included cable to connect either one of the 3-pin outputs on the control
unit to the 3-pin input inside the control unit well.
Either of the control unit’s outputs may be used, but not both. To connect additional
machines, use the “Slave output” on the rear panel of the smoke machine.
P O W E R
To enable the heater circuit, simply turn the knob on the control unit clockwise until
the POWER LED lights.