Optional
accessories
21
Optional accessories
Fitti ng the DMX decod er module
The optional DMX decoder replaces the blanking plate on the rear of the
Magnum 2500HZ.
DANGER! Disconnect the power supply before removing the blanking plate.
Live parts inside!
1.
Remove and keep safe the two screws holding in the blanking plate,
and remove the plate.
2.
Locate the DMX interface ribbon cable inside the rear of the unit and
plug onto the connector on the DMX interface circuit board (PL5).
3.
If you cannot locate the ribbon cable, you will need to remove the main
covers of the unit. The ribbon cable connects the main circuit board to
the DMX interface.
4.
Fit the new DMX module into the rear panel and tighten the screws.
5.
Refit any covers you have removed before reconnecting the power
supply.
Содержание Magnum 2500Hz
