Martin MAC Allure Wash PC, Руководство пользователя

Страница: 30 / 34

30 MAC Allure Wash PC User Guide
**Menus marked ** are available only when the fixture is connected to mains power. All other menus are available in mains- and
battery-powered operation.
TEST
(continued)**
TEST EFFECTS BEAMSHAPER ... FOCUS
Run test sequence of effects.
To test a specific effect, use Up/Down
buttons to scroll through groups. Press
Enter to pause and press again to restart
test sequence.
Press Menu button to exit test
TEST PAN/TILT
PAN
Run test sequence of pan functions.
Press Menu button to exit test
TILT
Run test sequence of tilt functions.
Press Menu button to exit test
MANUAL
CONTROL**
RESET Reset fixture
STROBE ... FX SYNC
Scroll through effects, then manually
control an effect
SERVICE
ERROR LIST Empty or up to 20 errors Display any errors in memory
FAN CLEAN ON/ OFF Start/stop fan cleaning
PT FEEDBACK
ON
Enable pan/tilt position feedback
systems
OFF Disable pan/tilt position feedback
ADJUST
PAN/TILT AT END
STOP
STEP 1
To adjust, move head to P/T adjustment
position, then press Enter
STEP 2
To adjust, move head to P/T adjustment
position again, then press Enter
CALIBRATION
DIMMER -30.00 ... 0.00% Set max. dimmer intensity level
RED -30.00 ... 0.00% Set max. red intensity level
GREEN -30.00 ... 0.00% Set max. green intensity level
BLUE -30.00 ... 0.00% Set max. blue intensity level
BEAMSHAPER I/R -25.00 ... 25.00% Calibrate prism indexing
ZOOM -5.00 ... 5.00% Set zoom home position
FOCUS -5.00 ... 5.00% Set focus home position
PAN -2.00 ... 2.00% Set pan home position
TILT -2.00 ... 2.00% Set tilt home position
LOAD DEFAULTS LOAD Load factory default calibration settings
SAVE DEFAULTS SAVE
Replace factory default calibration settings
with current calibration settings
USB
NO DEVICE
No USB device present or no firmware on
USB device
UPDATING FILES
Fixture updating internal memory from
USB device
AVAILABLE
FIRMWARE XX.XX.XX ...
XX.XX.XX
Select firmware from versions stored in
internal memory. Scroll to select version,
then press Enter and confirm your choice
to update
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes (Default settings in bold print)
Table 4: Control menus