22
MAC 550 Profile
R
OUTINE
MAINTENANCE
The MAC 550 Profile requires routine cleaning. The schedule depends heavily on the operating environment; please
consult a Martin service technician for recommendations.
Refer any service operation that is not described here to a qualified Martin technician.
Important! Excessive dust, smoke fluid, and particulate buildup degrades performance and causes
overheating and damage to the fixture that is not covered by the warranty.
Warning!
Disconnect the fixture from power before removing any cover.
Tilt lock
Important! Release the tilt lock before operating the fixture.
The tilt position of the head can be locked for transportation and service
with the tilt lock. To lock or unlock the head, pull on the lock and turn it
one-quarter turn in either direction.
Disassembly
T o r e mov e t h e g o b o mo du l e
1
Disconnect the fixture from power and allow it to cool.
2
Remove the top and bottom head covers.
3
Flip the head upside down. Turn the focus motor gear clockwise by hand until the focus reaches the forward
limit. Flip the head right-side up.
4
Unlock the gobo module by pulling the levers on each side towards the center. Pull the module up 1 cm (0.5
in.) and release the levers. Remove the module.
Figure 12: Tilt lock
Figure 13: Move focus lens to forward limit
Figure 14: Unlock and lift module
Downloaded from
www.Manualslib.com
manuals search engine