20
MAC 550 Profile
T o r e pl ace r o t at i n g go b o s
Important! The gobo can fall out if the spring is inserted backwards.
1
Disconnect the fixture from power and allow it to cool.
2
Position the head upside down and remove the bottom head cover.
Turn the gobo wheel to the desired position. Grasp the holder by the
teeth and pull the holder lightly towards the front lens to release the
holder and remove it from the wheel.
3
With a small screwdriver or similar, unhook the end of the gobo
spring furthest from the gobo and pull out the spring. Drop the gobo
out of the holder.
4
Insert the new gobo in the holder with the “stage” side down, away
from the spring. See Figure 9 and Figure 10.
5
Insert the spring with the narrow end against the gobo.
To identify
the narrow end, press the spring flat: the narrow end is on the inside. Push the end of the spring in under the
lip of the holder.
6
Verify that the gobo is seated flush against the holder. Press the spring as flat as possible against the back
of the gobo.
7
Work the rim of the gobo holder under both clips and snap the gobo holder back into position. If necessary,
a small screwdriver or similar tool may be used to pry the clips away from the wheel.
8
Replace the bottom cover and release the tilt lock before operating.
T o r e pl ace st at i c g ob o s
1
Disconnect the fixture from power and allow it to cool.
2
Remove the top head cover.
3
Turn the gobo wheel to the desired position. Press the gobo from the lamp side to release. Remove the
gobo.
4
To insert a gobo, orient the gobo as shown in Figure 9 and place the edges under the retention spring.
Verify that the gobo is centered in the opening.
5
Replace the top head cover before applying power.
Animation wheel
The MAC 550 Profile comes with the “Radial breakup” animation wheel installed. Three additional stock patterns are
available.
Figure 10: Rotating gobo holder
Figure 11: MAC 550 Profile animation wheels
Radial breakup (included)
P/N 62325048
Spiral breakup (optional)
P/N 62325049
Linear breakup (optional)
P/N 62325050
Coarse tangential (optional)
P/N 62325051
Downloaded from
www.Manualslib.com
manuals search engine