Martin MAC 401 CT Zoom, Руководство пользователя

Страница: 6 / 48

6 MAC 401™ user manual
Introduction
Thank you for selecting the MAC 401™, an intelligent LED-based moving head washlight fixture from Martin
Professional™ that is available in two models:
• The MAC 401 Dual™, with an RGB Zoom LED module fitted as standard
• The MAC 401 CT Zoom™, with a CT (Color Temperature) Zoom LED module fitted as standard.
The MAC 401 features:
• A twin-face head that can operate with one or two plug-and-play LED modules
• Various RGB (red, green, blue), HSV (hue, saturation, value), electronic ‘color wheel’ and CTC (color
temperature control) control options depending on LED module(s) fitted and control mode selected
• DMX control
• Onboard control panel with LED display
• Two ranges of pre-programmed superimposable dynamic effects
• Four pixel grouping options
• Smooth electronic dimming
• Electronic strobe with pulse effects
• Motorized zoom providing beam angles from 20° - 50°, as well as 16° Hypermode effect
• 630° pan and 300° tilt ranges
For the latest firmware updates, documentation, and other information about this and all Martin Professional
products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark
Warning! Read “Safety Information” on page 3 before installing, powering, operating or servicing
the MAC 401™.
Unpacking
The following items are included with the MAC 401:
• One LED head module (installed): RGB Zoom module in MAC 401 Dual, CTC Zoom module in MAC 401
CT Zoom
• Two clamp attachment brackets with quarter-turn fasteners
• This user manual
• Neutrik PowerCon input connector
Using for the first time
Before applying power to the fixture:
• Check the Martin Professional website at www.martin.com for the most recent user documentation and
technical information about the MAC 401. Martin user manual revisions are identified by the letter at the
bottom of page 2.
• Carefully review “Safety Information” on page 3.
• Check that the fixture’s power voltage and frequency ranges match the local AC mains power source. See
“Power voltage” on page 8.
• Prepare the cabling and connectors for running the fixture off AC power as described in “Power cable and
plugs” on page 8.