Martin MAC 401 CT Zoom, Руководство пользователя

Страница: 41 / 48

Onboard control menus 41
PERS
(continued)
ERRM
NORM
Display errors at 100% intensity (regardless of
DINT
setting) and
illuminate the service light.
SLNT
Silent error mode. The error message does not appear in the display,
but the service lamp is illuminated
CTC
(RGB
Zoom
module
only)
WITH
Sending a value on a CTC channel adjusts the temperature of
whatever color is currently being displayed on segment or fixture
INDP
Sending a value on a CTC channel overrides any color being displayed.
Fixture or segment switches to white with variable color temperature
FACT
FACT LOAD
Return all settings (except calibrations) to factory defaults
NB: can take up to 2 minutes to complete!
CUS1,
CUS2,
CUS3
LOAD
Load custom configuration
SAVE
Save current custom configuration
DMXL
RATE
DMX transmission speed, live, in packets per second
QUAL
Percent of packets received with errors, live
STRT
Decimal value of the DMX start code, live
FRNT
SHUT-
FIXT
SET
0 - 255
DMX value received on each channel, front module
REAR
SHUT -
FIXT
SET
0 - 255
DMX value received on each channel, rear module
SERV
To access
this menu,
hold
[Enter]
pressed for
a few
seconds
PTFB
ON
Enable pan/tilt position feedback/correction system
OFF
Disable pan/tilt feedback for servicing (this setting is not saved when
fixture is reset)
ADJ
Effects adjustment menu (for service use: for full details of this menu,
see “Adjustment submenu” on page 42)
CAL
(OF =
offset)
P OF
Pan calibration
T OF
Tilt calibration
DOF SURE
Load factory effects calibration settings
PCBT SURE
PCB test: for service use only
UPLD SURE
Manually set fixture to receive software upload
HEAD
DUAL
Sets head to dual head module operation (selected by default if two
modules are installed on the head)
SNGL
Sets head to single head module operation
Menu Item Item Options Notes (Default settings in bold print)
Table 7: Control menu: dual head module operation