38
MAC 401™ user manual
Dual head module operation
When you install a second head module on the rear of the head,
DUAL
is automatically selected in the
HEAD
menu and
FRNT
and
REAR
menus become available in the control panel:
• If the
FRNT
menu is selected, the commands you enter are applied to the front head module.
• If the
REAR
menu is selected, the commands you enter are applied to the rear head module.
• The
PERS
,
FACT
,
DMXL
,
SERV
and
HEAD
menus apply to the entire fixture.
As with single head module operation, the MAC 401 automatically detects whether an RGB Zoom or CT
Zoom module is installed on the front and the rear of the head and adjusts the control menus accordingly.
The following control menus are available:
HEAD
DUAL
Sets head to dual head module operation
SNGL
Sets head to single head module operation
Menu
Item
Item
Options
Notes (Default settings in bold print)
FRNT
ADDR
1
– XXX
DMX address of module on front of head (default address = 1). The
DMX address range is limited so that the fixture will always have
enough DMX channels in the 512 available.
DMX
PSET
(fixture auto-
detects which
module is
installed and
displays either
RGB/HS
1
or
CT
2
menu
items)
RAWX
Non-calibrated RGB mode with dynamic effects
1
RGBX
Calibrated RGB mode with dynamic effects
1
HSX
HSV mode with dynamic effects
1
RAW
Non-calibrated RGB mode without dynamic effects
1
RGB
Calibrated RGB mode without dynamic effects
1
HS
HSV mode without dynamic effects
1
CTX
CT mode with dynamic effects
2
CT
CT mode without dynamic effects
2
PGRP
1
Individual control of 4 pixels (segments)
2H
Control of pixels in 2 groups of 2 pixels, horizontal split
2V
Control of pixels in 2 groups of 2 pixels, vertical split
All
All pixels controlled as one group
PINV
OFF
Disable pixel inversion
ON
Pixel inversion: pixels swapped left to right and top to bottom
INFO
VERS
MAIN
CPU firmware version in main processor
HEAD
CPU firmware version in head processor front module / rear module (if
installed)
POHR
RSET
Hours of operation since counter reset (to reset counter, display counter
and press [Up] for 5 secs.)
TOTL
Total hours of operation since manufacture
MTMP
CURR
Display current main PCB temperature
MSR
Display highest main PCB temperature since last reset
MR
Display highest main PCB temperature since manufacture
DTMP
CURR
Display current average driver PCB temperature
MSR
Display highest driver PCB temperature since last reset
MR
Display highest driver PCB temperature since manufacture
PTMP
CURR
Display current average pixel PCB temperature
MSR
Display highest pixel PCB temperature since last reset
MR
Display highest pixel PCB temperature since manufacture
Table 7: Control menu: dual head module operation
Menu
Item
Options
Notes (Default settings in bold print)
Table 6: Control menu: single head module operation
Содержание MAC 401 CT Zoom
Страница 1: ...MAC 401 Dual MAC 401 CT Zoom user manual TM TM...
Страница 47: ......
Страница 48: ...www martin com Olof Palmes All 18 8200 Aarhus N Denmark Tel 45 8740 0000 Fax 45 8740 0010...